There are a lot of factors when choosing your next air conditioning installation in Tampa. You have to think about financial benefits each unit can bring you in the form of energy efficiency, but you also need to know it can get the job done when air conditioning your home. Here are a few tips to get you started.
Determine Your Square Footage
Before you even start to look at air conditioner brands or different ratings, you should know the square footage of your home. Keep in mind that you should only get the measurements for the areas you want cooled. For example, you should not include the garage or an attached shop area, unless they have been converted to include cooling. After you have you found the square footage of your home, then you can start looking at various ratings, which include British Thermal Units (BTUs) and Seasonal Energy Efficiency Ratio (SEER).
Find the Correct Cooling Capacity
With the square footage, you can now look to the cooling capacity of various air conditioner units. Cooling capacity is measured by BTUs, and it measures a system’s ability to remove heat from the area. As air conditioners remove hot air, they are leaving cool air in its place. The amounts of BTUs a unit has will determine how big of a space it can cool. For example, a small house measured at 1,200 sq. ft. will need a unit with 21,000 BTUs. A large home at 2,500 sq. ft. will need a unit with 34,000 BTUs.
Consider the Unit’s Energy Efficiency
Whether you are replacing a faulty air conditioner or simply upgrading, you should always be looking for the energy efficient models. The United States Environmental Protection Agency and the United States Department of Energy have the SEER, or EER, rating on every air conditioner available. This rating system states how efficient the unit is based on its cooling capacity. When looking for a new unit, you want a high SEER number. The higher the number is, the more potential you have to save on future energy bills.